Questions and answers - Digital advanced lighting

DPD-1-300

HOW TO SET RGB OR RGBW MODE IN THE DIGITISER DPD-1-300 Firmware: T 15 Remove XLR data lead, Hold down "Enter" for a few seconds until "Addr" is displayed. Tap "Enter" key x 5 until "rGbU". Press the right hand "+" key until "OFF" for RGB led strip, "On - 3" for RGBW led strip controlled 3 channel smart white or "On - 4" for RGBW led strip controlled in 4 channel mode. Once selected to the correct setting press "Enter" key to save. Hold down "Enter" for a few seconds to exit the menu setup options.

14th November

DPD-1-300

HOW TO SET THE PIXEL MAPPING MODE IN THE DIGITISER DPD-1-300 Remove XLR data lead, Hold down "Enter" for a few seconds until "Addr" is displayed. Tap "Enter" key x 1 until "SHOU". The display will toggle its current setting. Factory setting will toggle "SHOU - nOdE", this setting means the driver is in 24 channel "Show mode" Press the right hand "+" x 2 until "1" is displayed. The driver is now set to one led per pixel. If you require more led's as a pixels press the "+" key that will show 2/3/4/5/6 thru 149. Press "Enter" to set the option. Press the right hand "+" key until "OFF" for RGB led strip, "On - 3" for RGBW led strip controlled 3 channel smart white or "On - 4" for RGBW led strip controlled in 4 channel mode. Once selected to the correct setting press "Enter" key to save. Hold down "Enter" for a few seconds to exit the menu setup options

14th October 2017

DPD-1-300

16th October 2017

Event Name

14 JUN